Description
1763-L16BWA Allen-Bradley Power module
Brand:Allen-Bradley Model number:1763-L16BWA
Lead Time:3-day working day Country of origin: United States
Price: Please contact us Product weight:2.145kg
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: FedEx, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Product details:
• Substitution of components may impair suitability for Class I, Division 2.
• Do not replace components or disconnect equipment unless power has been
switched off.
• Do not connect or disconnect components unless power has been switched off.
• This product must be installed in an enclosure. All cables connected to the
product must remain in the enclosure or be protected by conduit or other means.
• All wiring must comply with N.E.C. article 501-10(b).
• The interior of the enclosure must be accessible only by the use of a tool.
• For applicable equipment (for example, relay modules), exposure to some
chemicals may degrade the sealing properties of the materials used in these
devices:
– Relays, epoxy
It is recommended that you periodically inspect these devices for any degradation
of properties and replace the module if degradation is found.
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or non-hazardous
locations only. The following WARNING statement applies to use in hazardous locations.
The 4 high-speed inputs (inputs 0 through 3) can be used for pulse latching or higher speed counting. Refer to Input
Specifications on page 25 and the MicroLogix 1100 Instruction Set Reference Manual, publication 1763-RM001, for more
information.
MicroLogix 1100 controllers are suitable for use in an industrial environment when installed
in accordance with these instructions. Specifically, this equipment is intended for use in clean,
dry environments (Pollution degree 2(1)) and with circuits not exceeding Over Voltage
Category II(2) (IEC 60664-1).(3)
Install your controller using these installation instructions.
Do not remove the protective debris strip until after the controller and all other equipment
in the panel near the controller are mounted and wiring is complete. Once wiring is
complete, remove protective debris strip. Failure to remove strip before operating can
cause overheating.
Electrostatic discharge can damage semiconductor devices inside the controller. Do not
touch the connector pins or other sensitive areas.
(1) Pollution Degree 2 is an environment where, normally, only non-conductive pollution occurs except that occasionally a
temporary conductivity caused by condensation shall be expected.
(2) Over Voltage Category II is the load level section of the electrical distribution system. At this level transient voltages are
controlled and do not exceed the impulse voltage capability of the product’s insulation.
(3) Pollution Degree 2 and Over Voltage Category II are International Electrotechnical Commission (IEC) designations.
Advantages: Foxboro, OVATION, TRICONEX, Allen-Bradley, ABB, Motorola, Siemens Moore, Ge Fanuc, Woodward, Bently Nevada and other major import brands!
We have the same series of models in stock. If you don’t find the model you need, please contact us and we will provide you with an official quotation!
Colour:new Warranty: 12 months
Lead Time:3-day working day Country of origin: Sweden
Price: Please contact us Product weight:0.515kg
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
The following are other related models. If you can’t find the product you need, please contact us. Thank you
Allen-Bradley 440G-TZS21UPRH
Allen-Bradley 700-HLS1U2
Allen-Bradley 1440-SDM02-01RA
Allen-Bradley 1492-IFM40F-3
Allen-Bradley 1746-A10
Allen-Bradley 1746-NI4
Allen-Bradley 1746-NI8
Allen-Bradley 1747-L541
Allen-Bradley 1747-L552
Allen-Bradley 1756-A4
Allen-Bradley 1756-A10
Allen-Bradley 1756-A13
Allen-Bradley 1756-DHRI0C
All other brand or product names mentioned in this document may be trademarks or registered trademarks of their respective holders.
- Full 12-month warranty on all components
- Dedicated after-sales support
- Same-day dispatch on 1000s of parts
- All units are fully tested
- 1. Email confirmation
You will get an email confirming that we have received your enquiry. - 2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition. - 3. Your quote
You will receive a comprehensive quote tailored to your specific needs.